Voice Response System (VRS)
Aspire Software Manual Features ◆639
GENERAL MESSAGE
To listen to the General Message:
Keyset Only
Your MW LED flashes when there is a new General Message. A voice message period-
ically reminds you.
1. Do not lift the handset or press CALL.
2. Dial 4 (General).
OR
1. At lift the handset and dial 111.
You will hear the General Message.
Normally, your MW LED goes out. If it continues to flash, you have unanswered “Mes-
sage Waiting” requests or new messages in your “Voice Mail” mailbox.
To record, listen to or erase the General Message:
1. Press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 112.
3. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
If you dialed 7 to record, press # to end the recording.
If you dialed 5 to listen, you can dial 5 to listen to the message again.
To Record the General Message again, go back to step 1.
If you dialed 3 to erase the General Message, you must go to step 4 (hang up). To
cancel without erasing on a keyset, press HOLD instead and go back to step 1.
4. Hang up when you are done.