Toll Restriction
574 Features Aspire Software Manual
Programming
14-01-08 : Basic Trunk Data Setup - Toll Restriction
For each trunk, enter 1 to enable Toll Restriction; enter 0 to disable Toll Restriction.
15-01-05 : Basic Extension Data Setup - Restriction for Outgoing Disable on Incoming
Line
Enable (1) or disable (0) supervised dial detection for an extension.
20-06-01 : Class of Service for Extensions
For each extension, assign a Class of Service (1-15).
20-08-02 : Class of Service Options (Outgoing Call Service) - Trunk Calls
For each Class of Service, decide whether to enable (1) or disable (0) an extension’s ability to
place an outgoing trunk call.
20-13-20 : Class of Service Options (Supplementary Service) - Account Code/Toll
Restriction Operator Alert
When toll restriction is violated, determine if the operator should be notied. (0=disable,
1=enable)
21-01-10 : System Options for Outgoing Calls - Dial Digits for Toll Restriction Path
If this option is programmed with an entry other than “0”, a call will not have a talk path
unless the user dials at least the number of digits entered in this option when placing an outgo-
ing call. This means that an entry of 4 or higher in this program will cause a problem when
dialing 911. Since it is only a 3-digit number, the call will not have a talk path, preventing the
emergency dispatcher from hearing the caller. It is recommended that this option be kept at its
default setting of “0” to prevent any problems with dialing 911.
21-01-15 : System Options for Outgoing Calls - Outgoing Disable on Incoming Line
Enable (1) or disable (0) the Outgoing Disable on Incoming Line feature.
21-01-16 : System Options for Outgoing Calls - Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line feature, if dial tone is not detected after the
extension answers an incoming line, the system determines the call is unable to complete and
releases the DTMF receiver (0-64800 seconds).
21-01-17 : System Options for Outgoing Calls - Restriction Digit in Outgoing Disable on
Incoming Line
With the Outgoing Disable on Incoming Line feature, determine the number of digits (0-9) to
be dialed before the call should be disconnected.
21-04-01 : Toll Restriction Class
For each extension, assign a Toll Restriction Class for reach Night Service mode.
21-05-01 : Toll Restriction Class - International Call Restriction Table
For the Toll Restriction Class you select, enable (1) or disable (0) the International Call
Restrict Table (Program 21-06-01).
21-05-02 : Toll Restriction Class - International Call Permit Table
For the Toll Restriction Class you select, enable (1) or disable (0) the International Call Permit
Table (Program 21-06-02).
21-05-04 : Toll Restriction Class - Maximum Number of Digits Table Assignments
For the Toll Restriction Class you select, disable (0) or enable (1) the dialing limit for calls.
When enabling, select from entries 1-4 in Program 21-06-03.
21-05-05 : Toll Restriction Class - Common Permit Code Table
For the Toll Restriction Class you select, enable (1) or disable (0) the Common Permit Code
Table (Program 21-06-04).
21-05-06 : Toll Restriction Class - Common Restrict Code Table
For the Toll Restriction Class you select, enable (1) or disable (0) the Common Restrict Code
Table (Program 21-06-05).