Aspire Wireless
Aspire Software Manual Features ◆107
Registration
Registering an Aspire Wireless Handset
To cancel the registration process at any point, press the SPK or Headset key, or place
the handset on-hook.
1. From a keyset, press SPK key and dial the service code defined in Program 11-10-30.
2. Enter the extension number to be assigned.
If the DSIU is unavailable or if the extension number is invalid, the system displays an
error message and the phone is returned to an idle condition.
If another keyset is registering a phone, the system indicates "DSIU Busy" and the
phone is returned to an idle condition.
If the extension number entered is already subscribed, the system displays the follow-
ing message "Already Subscribed".
3. When a valid extension number is entered, the system displays the extension number and the
AC number and enters the registration mode.
4. Using the Aspire Wireless phone to be registered, press the Menu key then press the Left
Arrow key twice to display the Login option. Press OK.
5. Press the Right Arrow key once to display the Subscription Create option. Press OK.
6. The Aspire Wireless phone will search for the DSIU PCB and display the PCB’s ID number
once found.
This may take a few seconds. If the ID number does not appear, check Program 90-27-
01 to make sure the PCB is recognized.
7. Press OK.
8. Enter the 4-digit AC number displayed in Step 3 and press OK.
9. Once the phone has been registered, the phone will beep and (((.))) will appear in the lower
left-hand corner.
If the registration was successful, the display will indicate: "Completed".
If the registration failed, the display will indicate: "Failed".
If the registration was failed due to timeout, the display will indicate:
"No Response".
Unregistering an Aspire Wireless Handset
1. From a keyset, press SPK key and dial the service code defined in Program 11-10-31.
2. Enter the assigned extension number.
If the DSIU is unavailable or if the extension number is invalid, the system displays an
error message and the phone is returned to an idle condition.
If another keyset is registering a phone, the system indicates "DSIU Busy" and the
phone is returned to an idle condition.
If the extension number entered is already subscribed, the system displays the follow-
ing message "Already Subscribed".
3. When a valid extension number is entered, the system requests a confirmation that the phone
is to be unsubscribed.
"Delete DECTPP xxxxxxx
Ready (1: Yes)."
4. Press 1 to confirm or any other key to cancel the operation.
Once the phone has been unregistered, the phone displays "Completed".
If the Aspire Wireless phone was active on a call at the time it was unregistered, the
call will be dropped.