Tie Lines
566 ◆Features Aspire Software Manual
➻34-09-09 : ANI/DNIS Service Options - Calling Number Address Length
When Item 1=0 (ANI/DNIS receive format is address), use this option to specify the address
length. The choices are from 1 to 8 digits in length.
➻80-03-01 : DTMF Tone Receiver Setup
80-04-01 : Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection for tie
line calls.
➻81-03-01 : 4TLIU Initial Data Setup
Make sure the Tie Line Timer settings are compatible with your local telco.
Related Features
Automatic Route Selection/Trunk Group Routing
In a system with ARS enabled:
When a tie line user dials 9 for an outside call, the system routes the call via ARS.
In a system with ARS disabled:
When a tie line user dials 9 for an outside call, the system uses the routes programmed for
Trunk Group Routing.
Central Office Calls, Placing
Depending on programming, you can seize a tie line by:
●Pressing a line key
●Pressing a One-Touch Key
●Dialing a trunk group code
●Dial codes which directly accessing a specific tie line
Dial Tone Detection
Refer to this feature for the specifics on how the system handles Dial Tone Detection.
Long Conversation Cutoff
Long conversation cutoff is controlled separately for DISA and tie lines.
Networking
The Networking feature can use tie lines to connect the different networking nodes.
Toll Restriction
Incoming tie line calls can have a Toll Restriction class and can be subject to the system’s toll
restriction.
Trunk Groups
To simplify placing calls over your tie lines, you can put the tie lines in a trunk group.