One-Touch Calling
454 ◆Features Aspire Software Manual
Personal Speed Dial
To program a One-Touch Key for Personal Speed Dial:
1. Press idle CALL key and dial 855.
2. Press One-Touch Key you want to program.
3. Dial general trunk access code (9).
OR
Dial Specific Trunk Service Code (#9 ) plus the trunk number (e.g., 005).
OR
Dial Trunk Group Service Code (804) plus the trunk group number (e.g., 1).
4. Dial number you want to store.
The total of the digits stored in steps 3 and 4 cannot exceed 24.
Valid entries are 0-9, # and *. To enter a pause, press MIC. To store a Flash, press FLASH.
5. Press HOLD.
6. Enter the name associated with the key you are programming.
7. Press HOLD.
8. Press SPK to hang up.
To program a One-Touch Key for Personal Speed Dial (if your phone doesn’t have
One-Touch keys):
Use this procedure for 2-button and analog single line (SLT) sets.
1. Lift handset.
2. Dial 855.
3. Dial the Personal Abbreviated Dialing bin (0-9).
Bins 1-9 correspond to One-Touch keys 1-9; bin 0 corresponds to One-Touch key 10.
4. Dial the number you want to store and press HOLD twice.
Valid entries are 0-9, # and *. To enter a pause, press MIC. To store a Flash, press FLASH.
5. Hang up.
To dial the stored number:
1. Call (or lift handset).
2. Dial #7 + bin number (0-9).