NEC 5 - page 566

Tandem Trunking (Unsupervised Conference)

548 ◆Features Aspire Software Manual

➻20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect

In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the

extension to disconnect an Unsupervised Conference in progress (initially set up using Method B).

➻20-11-14 : Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer

Disable (0) the Trunk-to-Trunk Transfer Restriction option.

➻20-11-21 : Class of Service Options (Hold/Transfer Service) - Restriction for Tandem

Trunking on Hang Up

Deny (1) an extension user’s ability to set up a tandem call automatically when they hang up.

➻20-13-10 : Class of Service Options (Supplementary Service) - Barge In Mode

In an extension’s Class of Service, set whether an extension should be able to Barge In to a

call and talk (1) or just monitor the call (0).

➻24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer

This timer will start when a trunk begins talking with another trunk (for example: trunk-to-

trunk transfer, outgoing from trunk, Tandem Trunking) (0-64800).

➻25-07-07 : System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation

Warning Tone Time

Determine the length of time a DISA caller or any trunk-to-trunk (such as Tandem Trunking)

conversation can talk before the Long Conversation tone is heard (0-64800 seconds).

➻25-07-08 : System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation

Disconnect

This timer determines how long the system will wait before disconnecting a DISA or any

trunk-to-trunk (such as Tandem Trunking) call after the Long Conversation tone is heard (0-

64800 seconds).

Tandem Trunking Method C - Tandem Trunking on Hang up

➻10-07-01 : Conversation Record Circuits

The number of circuits assigned as Conversation Record circuits limits the number of avail-

able Conference circuits. Make sure there are circuits available for Conference.

➻14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer Calls

Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.

➻14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer Calls

Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.

➻14-01-13 : Basic Trunk Data Setup - Loop Disconnect Supervision

For each trunk, enter 1 to enable loop supervision.

➻20-06-01 : Class of Service for Extensions

Assign a Class of Service (1-15) to an extension.