Program 12 : Night Mode Setup
12-01 : Night Mode Function Setup
Aspire Software Manual Programming ◆837
Program 12 : Night Mode Setup
12-01 : Night Mode Function Setup
Description
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the
following chart for a description of each option, its range and default setting.
Input Data
Note: Even if the operation mode is changed manually, the operation mode changes according to
the schedule set up.
Conditions
None
Feature Cross Reference
●Night Service
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
Item
No. Item Input Data Default Description Related
Program
01 Manual Night Service
Enable 0-off
1-on 1 Allows/prevents users from activating
Night Service by dialing a service
code.
11-10-01
02 Automatic Night Service 0-off
1-on 0 According to a preset schedule, enable
or disable Automatic Night Service for
the system.
12-02
12-03
12-04
03 Night Mode Switch
Operating Mode
(Sensor switch on
NTCPU only)
0-disable
1-8
(operation mode)
0 Use this option to set the operation
mode of the NTCPU Night Service
mode switch sensors (external Night
Mode Selector Switch). The Night
Service mode affects trunk inbound
and outbound routing.
Note: Function keys 1-8 can be used
to select the input data 0-Mode 7, but
to select Mode 8, the digit ‘8’ on the
dial pad must be pressed instead.