Cordless II/Cordless Lite II Telephones
Aspire Software Manual Features 251
Cordless II/Cordless Lite II Telephones
Description
The Aspire System supports a Cordless Telephone. The DTR-4R-1
Cordless II (P/N 730088) is a 900 MHz spread-spectrum digital
cordless telephone that provides mobility, exibility and conve-
nience for those who spend much of the workday away from their
desk. Fully integrated with the telephone system, the DTR-4R-1
Cordless II offers many standard features such as Park, Do Not
Disturb, Hotline, Voice Over and Voice Mail. Normally paired with
a companion keyset for improved 1-button call coverage capabili-
ties, the DTR-4R-1 Cordless II will also work as a stand-alone
telephone.
Complemented by 4 fully programmable function keys (with
LEDs), the DTR-4R-1 Cordless II achieves a whole new level
of convenience and mobility. An easy-to-read LCD display, vol-
ume controls, a rechargeable nickel-cadmium battery pack and
a handy belt clip round out the elegant and affordable DTR-4R-
1 Cordless II Phone. This phone provides 10 channels.
A second Cordless Phone is also available: the Cordless Lite II (P/N
730087). The Cordless Lite II offers the same features as the Cord-
less II except that it uses a NiMH battery and has FM modulation
(single channel) instead of the spread spectrum modulation. This
phone provides 30 channels.
The base unit provides a “Cordless” and “Desk” button which
allows the one extension port to switch from the Cordless to an
attached Aspire keyset. The phones must be in an idle state when the
button is pressed, otherwise any active call will be disconnected.
E911 Alarms
Prior to 4.0i software, if the system was set to display an E911 alarm
to telephones (Program 20-08-16), the cordless phones would also
indicate the display. There was no way for the users to clear the dis-
play of this alarm except by resetting the system. The system has now been changed to exclude the
Cordless II and Cordless Lite II phones from displaying the alarm.
Aspire S Aspire M/L/XL
• Available.
Cordless phones do not display E911 Alarm with soft-
ware 4.0i or higher.
The ability to press TALK after placing a CO call on
Hold without immediately recalling requires software
4.0W+.
Available with software 1.06+.
Cordless phones do not display E911 Alarm with soft-
ware 4.0i or higher.
The ability to press TALK after placing a CO call on
Hold without immediately recalling requires software
4.0W+.