Networking
Aspire Software Manual Features ◆441
Fax Over Networking
The purpose of Aspire Networking is to be able to connect several systems and have them appear to
operate as one system. However, some restrictions still apply. With older software, with Fax Over
Networking using H.323 trunks, if a resource was busy, the operation could not be performed effi-
ciently. Although the operation would continue if there were no G.711 compression, there was no
resending procedure with RTP and reliability was a problem. The software now enhances this oper-
ation to provide better performance.
With IP networking, the modem signal of the fax relay now uses H.245. This enhancement only
applies to G3.
Examples:
FAX Relay with SLT Extension (G3)
Setup:
●System A
Program15-03-03 = G3 Fax 1 (special)
Program 84-12-32 = 2 (Each Port Mode)
●System B
Program 15-03-03 = G3 Fax 1 (special)
Program 84-12-32 = 2 (Each Port Mode)