Program 10 : System Configuration Setup
10-28 : SIP Trunk Basic Setup
Aspire Software Manual Programming ◆779
10-28 : SIP Trunk Basic Setup
Description
Use Program 10-28 : SIP Trunk Basic Setup to set the basic options used for SIP trunks.
Contact Your NEC Sales Representative for information on the SIP feature availability.
Input Data
Conditions
None
Feature Cross Reference
VoIP
Level: Aspire S Aspire M/L/XL
IN • Available with software 2.63+. • Available with software 2.63+.
• Item 6 requires software 2.65+. • Item 6 requires software 2.65+.
Item
No. Item Input Data Default Related
Program
01 Domain Name
Define the Domain name. 64 characters maximum None
02 Host Name
Define the Host name. 48 characters maximum None
03 Transport Protocol
Define the Transport type. 0=UDP, 1=TCP 0
04 User ID
Define the User ID. Note: If
Program 10-23-04 for system
interconnection, this entry must
be numeric as 10-23-04 does
not allow text entry - only
numeric.
32 characters maximum No Entry
05 Domain Assignment
Define the Domain Assignment. 0=IP Address, 1=Domain name 0
06 IP Trunk Port Binding
If this entry is set to 0 (Disable),
an incoming call uses the lowest
port. If the entry is set to 1
(Enable), the incoming call uses
the port assigned in 10-36.
0 = Disable
1 = Enable 0 10-36-01