Program 22 : Incoming Call Setup
22-07 : DIL Assignment
Aspire Software Manual Programming ◆1065
22-07 : DIL Assignment
Description
Use Program 22-07 : DIL Assignment to assign the destination extension or Department Calling
Group pilot # (as assigned in Program 11-07) for each DIL Incoming trunk. A DIL rings an exten-
sion directly, without any other Access Map or Ring Group programming. If an extension has a line
key, the DIL rings the line key. If the extension does not have a line key, the DIL rings loop keys (if
programmed) or one of the CALL keys (CALL keys will always ring). Use Program 22-02 to des-
ignate a trunk as a DIL). You can make eight DIL assignments, one for each Night Service mode:
If trunks should be answered by the voice mail, enter the master/pilot number of the voice mail
group defined in Program 11-07-01.
Input Data
Conditions
Program 22-02 must be set to ‘4’ for the trunk.
Feature Cross Reference
●Direct Inward Line (DIL)
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
Trunk Port Number Aspire S: 1-8
Aspire: 001-200
Item No. Day/Night
Mode Number of Transferring Destination Default
01 Aspire S: 1-4
Aspire: 1-8 Extension number (Max. 8 digits)
Pilot number No setting