i-Series Telephones
Aspire Software Manual Features ◆363
Programming
Programming is the same as the Aspire keysets. Refer to the particular feature for
details.
Operation
Operation is the same as the Aspire keysets with the exception to the following
operation. Refer to the particular feature for details.
Caller ID
Temporary Memory/Call History
An unanswered call will cause the Call History key (PGM 15-07 or SC 851: 08) to flash, indicating
a new call has been placed in the temporary memory. If enabled in programming, the telephone’s
display will show “CHECK LIST”.
1. Press the Call History key (PGM 15-07 or SC 851: 08).
The last addition to the list is displayed.
2. Press the ARROW DOWN Soft Key to scroll through the list of numbers in memory.
3. The Call History key will remain on as long as entries remain in memory.
4. To place a call back to a number in the temporary memory list, with the number to be dialed
displayed, press a line, loop or CALL key.
The outgoing call is placed.
To clear all the numbers in the list, press CHECK + 9. To abort the clear function,
press CHECK + 0.
To redial your last call on an i-Series phone:
1. Press LINE + LND + #.
OR
2. Press LND + CALL key or # to redial the displayed number or press the LND key until the
desired number is displayed, then press # or CALL key.
If a line key is not pressed, the system automatically selects a trunk from the same
group as the original call.
OR
3. Press CALL key + #5.
If a line key is not pressed, the system automatically selects a trunk from the same
group as the original call.