Headset Operation
Aspire Software Manual Features ◆351
ANALOG SINGLE LINE TELEPHONES
To enable the headset mode:
1. Unplug the telephone handset.
2. Plug in the headset.
3. Off hook and dial the Headset service code (Program 11-11-43).
You will hear a single beep.
4. On hook.
To disable the headset mode:
1. Unplug the headset.
2. Plug in the telephone handset.
3. Off hook and dial the Headset service code (Program 11-11-43).
You will hear two beeps.
4. On hook.
To be in an Off Hook Idle Condition (Waiting for incoming call):
1. Off hook.
You hear internal dial tone then silence after Program 20-03-06 timer expires.
In this "Off Hook Idle Condition” condition, the SLT can receive an incoming call.
However, the SLT can NOT dial in this condition. The SLT will be indicated on a DSS con-
sole as being idle (LED lights off).
To answer an incoming call when the headset rings:
You hear ringing in the headset.
1. Hookflash (or press the Flash key if available) to answer the call.
OR
On hook and off hook to answer the call.
To disconnect a call:
1. While on a conversation, on hook to disconnect the call.
To make an internal / outgoing call with off hook idle condition:
1. Hookflash (or press the Flash key if available).
OR
On Hook and Off Hook.
You hear internal dial tone.
2. Dial the internal call number.
OR
Dial trunk access code and destination number.