Aspire Wireless
96 ◆Features Aspire Software Manual
Enhanced Features Added
The features for the Aspire Wireless phones have been enhanced. Note: In order to enable these
enhancements, the Aspire Wireless phones must be updated to software version PP4 and the
DSIU PCB must be updated to 1.16 or higher. When both the handset and DSIU are updated to
the correct version, Program 90-17-15 will display the version as V01.07.
●Calling Party Information with Transfer
Previously, when a call is transferred to an Aspire Wireless phone, the Calling Party Number
displayed on the LCD was that of the transferring extension - not of the transferred caller.
With this release, the Calling Party Number of the transferred caller will now be displayed.
●Incoming and Outgoing Collision Operation (DSIU firmware changed)
When a call collision occurred (an outgoing and incoming call on an Aspire Wireless occurred
at the same time), the incoming call would be answered. This is determined by the DSIU PCB
firmware. However, previously, the display did not indicate the incoming caller’s number.
With this enhancement, the DSIU PCB firmware has been changed. Now, when a call colli-
sion occurs, the phone will not automatically answer the call, but it will suspend the outgoing
call operation and indicate the incoming call.
●Message Waiting Icon Display
Previously, the Aspire Wireless phones did not provide an icon display to indicate when a
Message Waiting (MW), voice mail message, or general message using the VRS had been left
for the Aspire Wireless phone. With this enhancement, when a MW, voice mail message, or
general message using the VRS is left, the envelope icon will be shown in the LCD display.
If the Aspire Wireless is out of range or if the phone is turned off, the message indication will
be delayed until the phone returns into range or is powered up.
●Stand-by Display
The Aspire Wireless display has been changed to allow the name and number of the extension
to be displayed while in stand-by/idle mode. The stand-by display for the phone is renewed by
powering ON/OFF.
The extension name and number will display even if the Aspire Wireless phone is set with
Call Forward.
●ABB Search
An Aspire Wireless user can search the Common and Group Abbreviated Dial numbers for a
programmed name by entering one or more characters of the name. Previously, the user
needed to know the ABB number to be dialed - it was not possible to search or scroll through
the list of numbers programmed in the system.
EXT 310
310