Station Message Detail Recording
Aspire Software Manual Features ◆535
➻35-02-02 : SMDR Output Options - PBX Calls
If system is behind a PBX, enter 1 to have SMDR include all calls to the PBX. Enter 0 to have
SMDR include only calls dialed using PBX trunk access code.
➻35-02-03 : SMDR Output Options - Display Trunk Name or Number
Select whether the system should display the trunk name (0) or the number (1) on SMDR
reports. If this option is set to “0”, Program 35-02-14 must be set to “0”.
➻35-02-04 : SMDR Output Options - Daily Summary
35-02-05 : Weekly Summary and
35-02-06 : Monthly Summary
Enter 1 to enable a summary report. Enter 0 to disable a summary report. The daily report
prints every day at midnight. The weekly report prints every Sunday night at midnight. The
monthly report prints at midnight on the last day of the month.
➻35-02-08 : SMDR Output Options - Incoming Calls
Enter 1 if you want the SMDR report to include incoming calls. Enter 0 if you want the
SMDR report to exclude incoming calls.
➻35-02-09 : SMDR Output Options - Print Name or Number
Enter 0 if you want the SMDR report to include the extension’s name. Enter 1 if you want the
SMDR report to include the extension’s number.
➻35-02-10 : SMDR Output Options - All Lines Busy (ALB) Output
Enter 1 to report information when all lines in a group are busy and an extension user tries to
access the group. Enter 0 if this information should not be included.
➻35-02-12 : SMDR Output Options - DID Table Name Output
Determine if the DID table name should be displayed for incoming DID calls (0=Not Dis-
played, 1=Displayed).
➻35-02-13 : SMDR Output Options - CLI Output When DID to Trunk
Determine if the Caller ID should be displayed when the incoming DID number is transferred
to an outgoing trunk (0=Not Displayed, 1=Displayed).
➻35-02-14 : SMDR Output Options - Date
Determine whether the date should be displayed on SMDR reports (0=not displayed, 1=dis-
played). This option must be set to “0” if the trunk name is set to be displayed in Program
35-02-03.
➻35-02-15 : SMDR Output Options - CLI/DID Number Switching
Enter 0 to display the Caller ID number. Currently, option “1” for the DID number is not
available.
With software 4.0E+, determine if the Caller ID number (0), DID number (1) or Caller ID
name (2) should be displayed in the SMDR output.
➻35-02-16 : SMDR Output Options - Print Trunk Name or Received Dialed Number
Determine how the SMDR should print incoming calls on ANI/DNIS or DID trunks. If set to
(1), ANI/DNIS trunks can print DNIS digits. For DID trunks, if the received number is not
defined in Program 22-11-01, then no number will be printed. If set to (0) trunk names are
printed instead (as assigned in Program 14-01-01).
➻35-02-17 : SMDR Output Options - Print Account Code or Caller ID Name
Determine whether the Account Code (0) or Caller ID name (1) should appear in the SMDR
record. By default, the Account Code will be displayed.
Note: Program 35-01-08 must be set to "0" for this entry to be followed.