Tie Lines
Aspire Software Manual Features ◆567
Operation
To place a call over a tie line group:
1. Press idle CALL key and dial 804.
2. Dial tie line group number (Aspire S: 1-8, Aspire: 1-100).
3. Dial number.
OR
1. Press tie line group key (PGM 15-07 or SC 852: *02 + group).
2. Dial number.
To place a tie line call using Trunk Group Routing:
1. Press idle CALL key and dial 9.
2. Dial number.
To place a call over a specific tie line:
1. Press idle CALL key and dial #9.
2. Dial tie line number (e.g., 005 for line 5).
3. Dial number.
OR
1. Press tie line key (PGM 15-07 or SC 852: *01 + 1-200).
2. Dial number.
To Barge In after calling a busy extension:
The call must be set up for about 10 seconds before you can Barge In.
Listen for busy/ring or busy tone.
1. Call busy extension using tie line trunk.
2. Press Barge In key (PGM 15-07 or SC 851: 34).
After calling the remote system, you may be able to:
●Dial 9 to place an outside call through the remote system.
●Dial Service Code #9 + a trunk number to place outside calls over a specific trunk.
●Use the remote system’s Common Abbreviated Dialing.
●Call the remote system’s operator.
●Use the remote system’s Internal and/or External Paging.