Cordless II/Cordless Lite II Telephones
Aspire Software Manual Features ◆261
FLASH
To flash the trunk you are on:
1. Press TRANSFER.
Program 15-02-05 must be set to “2” for Flash to work.
HOLD
Use Hold instead of leaving the call off-hook:
1. Do not hang up + HOLD.
This puts your outside call on System Hold. Your co-workers can take the call off Hold.
To place the call on Exclusive Hold, press your Exclusive HOLD function key.
Intercom calls automatically go on Exclusive Hold when you press HOLD.
Prior to software 4.0W, do not press TALK or the call will automatically recall imme-
diately unless Group Hold is used.
Easily retrieve a call from Hold:
1. Press TALK + flashing line key.
OR
2. If the call was not on a line key (or was an Intercom call) simply press TALK.
INTERCOM
Dial co-worker using the Intercom:
1. Press TALK + Co-worker’s extension number.
Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you
hear a beep, begin speaking. Dialing 1 changes the mode.
For your Voice Mailbox, dial * 8.
For Paging, dial *1 + 0 for All Call or *1 + 1-64 for zones.
Do not press TALK or the call will automatically recall immediately unless Group
Hold is used.
LAST NUMBER REDIAL
Use Last Number Redial to quickly redial your last outside call:
1. Press TALK + a line key + REDIAL. If the Redial key has been reprogrammed, press a a pro-
grammed Redial function key instead.