Charts and Illustrations
Aspire Software Manual Features ◆29
Conference,
Voice Call Code: 32
Operation: Set up trunk
call + Press key
Setting up a Voice Call
Conference None -
Data
Communications Code: 66
Operation: Press key +
ext or outside number
Placing a data call On red when call
set up -
Department Calling Code: 46
Operation: Press Key Logging in or logging out of
your Department Calling
Group
On when removed,
Off when installed 150
Department Step
Calling Code: 36
Operation: Dial busy ext
+ Press key
Step Calling through a
Department Group for an idle
member
None #
Direct Station
Selection / One-
Touch Calling
Code: 01
Operation: Press key +
dest. ext. or outside tel. #
+ HOLD
Calling an extension or out-
side number using a DSS key Off = extension idle
On = extension busy
Flashing = DND
-
Do Not Disturb Code: 03
Operation: Press key +
code (0-4)
Setting your phone in DND DND key on red -
Do Not Disturb/Call
Forward Override Code: 37
Operation: Press key Calling an extension which is
in DND or Call Forwarded None -
General Purpose
Relay Code: 51 + relay number
Operation: Press key Activating the general pur-
pose relay On when active -
Group Call Pickup Code: 24
Operation: CALL +
Press key
Answering a call ringing
another phone in your Pickup
Group
None *#
Code: 25
Operation: CALL +
Press key
Answering a call ringing a
phone in another Pickup
Group - if you don’t know the
group number
None 869
Code: 26 + Pickup Group
(1-8 or 1-9 or 01-64)
Operation: CALL +
Press key + Pkup Group
Answering a call ringing a
phone in a specific Pickup
Group
None 868
Handset Cutoff Code: 40
Operation: Press key Cutting off the handset trans-
mission while on a call On when feature
active (no transmis-
sion on handset)
-
Headset Operation Code: 05
Operation: Press key Enabling or disabling
Headset Operation On red when
activated 834
Table 5: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
For this feature... Use this key... When your are... Key Lamp Status Also See
Srvc Code