Program 84 : Hardware Setup for VoIP
84-04 : VOIPU PCB DHCP Server Mode Setup
1450 ◆Programming Aspire Software Manual
84-04 : VOIPU PCB DHCP Server Mode Setup
Description
Use Program 84-04 : VOIPU PCB DHCP Server Mode Setup to determine whether the VOIPU
PCB should use a manually assigned IP Address or if it should obtain its IP Address from a DHCP
server.
Input Data
Conditions
●The system programming must be exited before this program option takes affect.
●This program will not be displayed in PCPro until signing in with the MF level password.
Feature Cross Reference
●VoIP
Level: Aspire S Aspire M/L/XL
MF • Available. • Available.
• With software 2.63+, this program requires
the manufacturer level password. • With software 2.63+, this program requires
the manufacturer level password.
Item No. Description Input Data Default
01 DHCP Server Mode
Define whether or not the DHCP Server is used.
If this item is set to 0:Disable, the values in Pro-
gram 84-05 will be used.
If this item is set to 1:Enable, the VoIPU will try
to obtain an IP address from a DHCP Server. The
DHCP server could be external (ie. on the LAN),
or could be the NTCPU (if Program 10-13-01 is
enabled)
0:Disable
1:Enable 0