NEC 5 , Operation

Call Forwarding, Off-Premise

Aspire Software Manual Features ◆165

Trunk-to-Trunk Forwarding - DID (3) Trunk Forwarding Using DID Translation Table

(in addition to above programming)

Refer to Direct Inward Dialing (DID) for additional DID programming.

➻22-11-05 : DID Translation Table Number Conversion - Transfer Destination 1

22-11-06 : DID Translation Table Number Conversion - Transfer Destination 2

For each DID Translation Table entry (1-2000), specify the ﬁrst and second Transfer Destina-

tions if the callers receives a busy or no answer (action deﬁned in 22-11-04).

(Destination Options: 0 = No setting, Aspire S: 1-8, Aspire: 1-100 = Incoming Group, 102 =

In-Skin/External Voice Mail, 103=Centralized Voice Mail, 01-264 = Department Group, 400

= DID, 401 = DISA, 1000-1999 = Abbreviated Number (000-999))

If the Transfer Destinations are busy or receive no answer, those calls are transferred

to the ﬁnal transfer destination (Program 22-10).

Operation

To activate Call Forwarding Off-Premise

1. At keyset, press idle CALL key + Dial *4 .

Press Call Forward (Device) key (PGM 15-07 or SC 851: 17)

At SLT, lift handset Dial *4 .

2. Dial 6 + trunk access code.

Trunk access codes are 9 (ARS/Trunk Group Routing), 804 + Line Group

(Aspire S: 1-8 or Aspire: 1-9, 01-99 or 001- 100) or #9 + Line number (e.g., 05 or 005 for

line 5.

3. Dial the outside number to which your calls should be forwarded.

4. (Keyset only) Press HOLD.

5. Press SPK (or hang up at SLT) to hang up if you dialed *4 in step 1.

Your DND or Call Forwarding (Device) Programmable Function Key ﬂashes.

To cancel Call Forwarding Off-Premise

1. At keyset, press idle CALL key + Dial *4 .

Press Call Forward (Device) key (PGM 15-07 or SC 851: 17)

At SLT, lift handset and dial *4 .

2. Dial 6 + HOLD.

3. Press SPK (or hang up at SLT) to hang up if you dialed *4 in step 1.

Your DND or Call Forwarding (Device) Programmable Function Key stops ﬂashing.