Nortel Networks 1000 LD 117 STIP ACF command

Features Page 103 of 910
IP Line Description, Installation and Maintenance
LD 117 STIP ACF command
A new sub-command ACF is added to the existing LD 117 STIP command.
Output
The output is similar to the existing LD 117 STIP output, with the addition of
a new column titled ACF STATUS. If the call is in an inactive state, the value
of the Call Server ACF timer follows that status, separated by a colon (:).
See Figure 7 on page 104 for an example of STIP ACF output using the ALL
parameter.
Table 15
LD 117 – STIP ACF command
Command Description
STIP ACF <status> Displays the Active Call Failover (ACF) information.
<status> – optional parameter. Specifies the status to be
output. Outputs all IP Phones involved in the following
types of calls:
• UNREG - UNREGISTERED calls
• HREG - HALF-REGISTERED calls
• REB - REBUILT calls
• HREB - HALF-REBUILT calls
• PREB - PARTIAL-REBUILT calls
• ALL – all types of ACF calls
If no status parameter is entered, all types of ACF calls
are output.