IP Line administration using Element Manager Page 631 of 910
IP Line Description, Installation and Maintenance
If both the Uses and Timeout parameters are entered, the password
expires based on whichever happens first, that is, the number of Uses is
reduced to zero or the Timeout has expired. If both the Uses and Timeout
parameters are entered and are set to zero, it is the same as not setting
the temporary password.
6From the Group drop-down list, select NodePwd.
7From the Command drop-down list, select nodePwdSet and click the
RUN button.
The window refreshes and displays the blank Node Password field. See
Figure 214.
8Enter the administrator IP Phone Installer Password in the Node
Password field and click the RUN button.
Figure 214
Node Password
This enables and configures the administrator password. The “password”
parameter can be null, or 6 to 14 digits in length. The valid characters are
0-9 * #. This command can be entered at any time. The new password
entered overwrites the previous password.
The text area returns the message 'Please run nodePwdShow to verify
the result.”
9From the Command drop-down list, select nodePwdShow and click
RUN.