Nortel Networks 1000 Table 106 lists the Audit commands.

Voice Gateway Media Card maintenance Page 757 of 910
IP Line Description, Installation and Maintenance
Table 106 lists the Audit commands.
auditRebootTimeSet “timeString” Sets the reset time for non-critical tasks to the value
defined by the timeString parameter.
The timeString is formatted as HH:MM and is in 24-hour
clock format. By default, the time is set to 02:00 (2 AM).
auditTaskSet tTaskName, 0/1 Forces a task to be considered critical or non-critical.
This command overrides the audit’s default setting for
the task. The tTaskName parameter specifies the task
(the VxWorks taskname), as displayed by the “i”
command.
The value of 0 marks the task as non-critical, the value
of 1 marks it as critical.
Table 106
Audit commands
Command Description
Signaling
Server
auditHistoryShow Displays the recent history of the audit task’s activity.
auditRebootSet Distributes globally the audit task from resetting the
card.
auditRebootTimeSet Sets the time of non-critical task triggered card
resets.
auditShow Displays audit task information, such as a list of tasks
and the time for non-critical tasks triggered resets.
auditTaskSet Enables manual setting of a task to critical or
non-critical status.
Table 105
Maintenance audit commands (Part 2 of 2)
Command Description