Features Page 221 of 910
IP Line Description, Installation and Maintenance
The following examples first set the system bandwidth to 75% and then print
the actual value.
.STHS 5 750
.TTHS 5
Table 43 describes the intrazone IP Phone Zone Traffic Report 16 output
data.
STHS TH tv -- TV Sets the system thresholds.
Note 1: A TH value of 5 is used for the zone bandwidth threshold.
Note 2: The system thresholds TV value is the percentage of the zone’s
maximum bandwidth. The range values are 000 – 999, where 000
corresponds to 00.0% and 999 corresponds to 99.9%. The default is
90.0%.
Table 43
IP Phone Zone Traffic Report 16 intrazone data output (Part 1 of 2)
Data Description
zone number of the zone
cmi intrazone calls made (successful)
cbi intrazone calls blocked
pi intrazone peak bandwidth (%)
ai intrazone average bandwidth usage (%)
vi intrazone bandwidth usage threshold violations
cul counts of unacceptable latency samples
cupl counts of unacceptable packet loss
cuj counts of unacceptable jitter samples
Table 42
System threshold commands (Part 2 of 2)
Command Description