Page 364 of 910 Configuration of IP Telephony nodes using Element Manager
553-3001-365 Standard 4.00 August 2005
Note 1: All IP addresses and subnet mask data must be in dotted decimal
format. Convert subnet mask data from Classless Inter-Domain (CIDR)
format. for more information, see “Subnet Mask Conversion from CIDR
to Dotted Decimal Format” on page 901.
Note 2: See Table 57 on page 307 for IP addresses and information
required in this procedure.
Note 3: The following sections discuss how to configure IP Line 4.5
using Element Manager. The following three sections found in the
IP Telephony section of Element Manager are not covered in this NTP:
– SNTP (see IP Peer Networking: Installation and Configuration
(553-3001-213)
– Gatekeeper (see IP Peer Networking: Installation and
Configuration (553-3001-213)
– Signaling Server (see Signaling Server: Installation and
Configuration (553-3001-212)

Internet Explorer browser configuration

Element Manager requires Microsoft Internet Explorer 6.0.2600 (or later).
Element Manager is not supported on the Netscape Navigator browser. The
PC should be a PIII with a 500 MHz processor (at minimum).
Follow the steps outlined in Procedure 24 on page 365 to prevent caching of
web pages by Internet Explorer.
IMPORTANT!
Internet Explorer caching interferes with the Element Manager
application, in that users cannot see real-time changes as they occur.
For this reason, Internet Explorer caching must be turned off.