Configuration of IP Telephony nodes using OTM 2.2 Page 499 of 910
IP Line Description, Installation and Maintenance
9From the OTM IP Telephony Gateway - IP Line 4.5 application, select
View > Refresh to show the card status. Otherwise, verify LAN
connections and IP configuration.
End of Procedure

Transmit node and card properties to Leader 0

To transmit the node and card properties to Leader 0, follow the steps in

Procedure 62.

Procedure 62
Transmitting node and card properties to Leader 0
1Log into LD 32 on the system. Disable the card in order to transmit the
card properties.
2Open OTM. From the OTM Navigator window, click on the Services
folder to expand the menu. Double-click on IP Line 4.5. The IP
Telephony Gateway - IP Line 4.5 window opens.
3From the list of IP Telephony nodes in the upper part of the window, select
the node to which configuration data is to be transmitted.
4Select Configuration > Synchronize > Transmit.
The Transmit Options window appears. See Figure 162 on page 500.

CAUTION

OTM 2.2 does not support transmitting node and/or card
properties to a node (or any of the card within the node)
which resides on a CS 1000 system.