Configuration of IP Telephony nodes using OTM 2.2 Page 463 of 910
IP Line Description, Installation and Maintenance
Note: Only the Customer Number is required to add a system. There is
no need to enter any other customer data. The other data in the Customer
tab and other System Properties tabs is not required for the IP Line 4.5
application. This data is used by other OTM applications.
End of Procedure
The following is a summary of steps required to configure a Voice Gateway
Media Card using OTM 2.2:
1“Manually add an IP Telephony node” on page 464.
2“Configure the card properties of the Voice Gateway Media Card” on
page 469.
3“Configure DSP profile data” on page 472.
4“Configure SNMP traps and ELAN gateway routing table” on page 476.
5“Configure the Call Server ELAN network interface IP address and the
TLAN voice port” on page 483.
6“Configure security for SNMP access” on page 485.
7“Configure file server access” on page 491.
8“Configure QoS” on page 493.