Page 156 of 910 Features
553-3001-365 Standard 4.00 August 2005
uftpRunTimeDataReset
The uftpRunTimeDataReset command is used to reset the run time data
field in the UFTP data block.
Figure 31 is an example of output from the uftpRunTimeDataReset
command.
Figure 31
uftpRunTimeDataReset command output
activeDlogShow
The activeDlogShow command displays the active log file information for
UFTP IP Phone firmware downloads. When no parameter is entered, the
output displays the contents of the entire active log file. When a line number
is entered, activeDlogShow[numOfLine], the output displays the active log
file by the number of lines.
Figure 32 on page 157 is an example of output from the activeDlogShow
command.