Page 658 of 910 IP Line administration using OTM 2.2
553-3001-365 Standard 4.00 August 2005
Alternatively, observe the display on the card and ensure it is displaying
F000.
41 At this point, verify the card software and firmware version. Upgrade the
software and the firmware, if necessary, using Procedure 64 on
page 507, Procedure 65 on page 512, and Procedure 67 on page 517.
However, apply these procedures only to this card.
End of Procedure

Delete a Voice Gateway Media Card from the node

To delete a Voice Gateway Media Card from the node, follow the steps in

Procedure 94.

To delete the Leader 0 Voice Gateway Media Card from the node, follow the

steps in Procedure 95 on page 660.

Procedure 94
Deleting a Voice Gateway Media Card from the node
1In the OTM Navigator window, click the Services folder. Double-click the
IP Telephony icon.
The IP Telephony window opens.
2Select the node in the upper portion of the window.
3In the IP Telephony window, select Node > Properties from the popup
menu.
The Node Properties window opens.
4Click the Configuration tab.
5Select the Voice Gateway Media Card to be deleted from the working list
at the bottom of the window.
6Click the Delete button.

CAUTION

These procedures are not supported for a node that
resides on a CS 1000 system.