Nortel Networks 1000 - page 125

Features Page 125 of 910
IP Line Description, Installation and Maintenance
RST ZONE <ZoneNumber> Immediately hard-resets all IP Phones, where:
• ZoneNumber = zone number
RST ZONE <ZoneNumber>
<START/STOP> <HH:MM>
Schedule or cancel hard-resets of all IP Phones in
specified zone.
<ZoneNumber> – zone number in which to reset
IP Phones
START/STOP – IP Phones reset, where:
— START – configures reset time schedule
— STOP – cancels scheduled reset
If START is specified and the last parameter is omitted,
then IP Phones are reset immediately.
<HH:MM> – hour and minute when IP Phones are to be
reset
With only the first parameter, or no parameters, the
schedule of IP Phones re-sets is printed.
RST FW <FWID>
<START/STOP> <HH:MM>
Hard-resets all IP Phones with specified firmware ID.
<F/W ID> – firmware ID of IP Phones that should be reset
<START/STOP> – schedules/cancels IP Phones
hard-reset. If START is specified and the last parameter is
omitted, then IP Phones are reset immediately.
<HH:MM> – hour and minute when IP Phones should be
reset
With only the first parameter, or with no parameters
specified, the schedule of IP Phones resets is printed.
Table 21
LD 117 commands (Part 2 of 2)
Command Description