Page 780 of 910 Voice Gateway Media Card maintenance using Element Manager
553-3001-365 Standard 4.00 August 2005
7Enter the Card Properties data.
a. Role: The role is assigned based on the information that Element
Manager reads from the card configuration. This is a read-only field.
b. Management LAN (ELAN) IP address: This is the ELAN network
interface IP address for the card. Element Manager and the system
use this address to communicate with the card.
c. Management LAN (ELAN) MAC address: The MAC address is the
Motherboard Ethernet address labeled on the faceplate of the Voice
Gateway Media Card.
d. Voice LAN (TLAN) IP address: This is the TLAN network interface
IP address for the card.
e. Voice LAN (TLAN) gateway IP address: This is the IP address of
the router interface on the TLAN subnet.
f. Hostname: This is the Host name.
g. Card TN: Enter the card slot number between 1 – 50.
h. Card processor type: Choose either Pentium or Media Card. Select
Pentium if using the ITG-P 24-port line card (dual-slot card). Select
Media Card if using the Media Card 32-port or 8-port line card
(single-slot card).
i. H323 ID: The H323 ID within IP Line 4.5 is for the Virtual Office/
Media Gateway 1000B feature. Keep the H323 ID the same for all the
elements within one node.
j. Enable set TPS: Select the check box.
k. System name: Enter the name of the system.
l. System location: Enter the location where the system resides.
m. System contact: Enter a contact name and telephone number.
8Click Save and Transfer.
The Node Configuration window opens.
9Click the Transfer/Status button associated with the node containing the
Voice Gateway Media Card.
10 After the transfer is complete, restart the new card.