IP Line administration using OTM 2.2 Page 651 of 910
IP Line Description, Installation and Maintenance
3If Voice Gateway Media Cards are added, deleted or replaced in the node
or if a Voice Gateway Media Card is replaced, then use one of the
following procedures:
• “Add a Voice Gateway Media Card to the node” on page 651
• “Delete a Voice Gateway Media Card from the node” on page 658
• “Delete the Leader Voice Gateway Media Card from the node” on
page 660
• “Change the IP addresses of an IP Telephony node in OTM” on
page 661
• “Replacing a Leader Voice Gateway Media Card” on page 801
End of Procedure

Add a Voice Gateway Media Card to the node

To add a Voice Gateway Media Card to the node, follow the steps in

Procedure 93.

Procedure 93
Adding a Voice Gateway Media Card to the node
1Choose a card slot for the new card. Note the TN.
2Configure IPTN on the system in LD 14 at the Call Server.
3Install the I/O cables for connection to the ELAN and TLAN subnets on
the selected card slot.
4In the OTM Navigator window, click the Services folder.
5Double-click the IP Telephony icon.
The IP Telephony window opens.
6Double-click the node in the upper portion of the window.
The Node Properties window opens.

CAUTION

This procedure is not supported for a node that resides
on a CS 1000 system.