Page 314 of 910 Installation and initial configuration of an IP Telephony node
553-3001-365 Standard 4.00 August 2005

Identify the IPE card slots on a CS 1000M or Meridian 1

Depending on the module that is used, the ITG-P 24-port line card must be

installed in a specific slot. Use Table 60 to identify the IPE card slots selected

for the Voice Gateway Media Card.

Configure card as a Leader or
Follower.
In OTM 2.2:
Procedure 61 on page 497
In Element Manager:
Procedure 36 on page 402
(Leader)
Procedure 38 on page 411
(Follower)
In OTM 2.2:
Procedure 61 on page 497
In Element Manager:
Procedure 36 on page 402
(Leader)
Procedure 38 on page 411
(Follower)
Add the card and configure
the card properties
In OTM 2.2:
Procedure 52 on page 469
In Element Manager:
Procedure 34 on page 395
In OTM 2.2:
Procedure 52 on page 469
In Element Manager:
Procedure 34 on page 395
Transmit/Transfer properties In OTM 2.2:
Procedure 62 on page 499
Procedure 63 on page 501
In Element Manager:
Procedure 37 on page 405
In OTM 2.2:
Procedure 62 on page 499
Procedure 63 on page 501
In Element Manager:
Procedure 37 on page 405
Table 60
Voice Gateway Media Card installation by module type
C 1000M/Meridian 1 modules ITG-P 24-port line card slots
NT8D37BA/EC IPE modules All available IPE card slots
NT8D37AA/DC IPE modules 0, 4, 8, and 12
Table 59
Installation summary (Part 2 of 2)
Step
ITG-P 24-port
line card Media Card line card