Page 680 of 910 IP Line administration using OTM 2.2
553-3001-365 Standard 4.00 August 2005
Figure 230
Retrieve Options window
4Under Retrieve Options, configure whether to retrieve Node properties
or Card properties by selecting one or more of the check boxes.
5Click Start Retrieve.
The results of the Retrieve command are displayed under Retrieve
control.
Note 1: If the Retrieve command is successful, the current configuration
of the node or card properties in OTM is overwritten by the configuration
data that was retrieved from the node. The new configuration data can be
viewed in the Node Properties window.