Configuration of IP Telephony nodes using Element Manager Page 397 of 910
IP Line Description, Installation and Maintenance
e. Voice LAN (TLAN) gateway IP address: This is the IP address of
the router interface on the TLAN subnet.
f. Hostname: This is the Host name.
g. Card TN: Enter the card slot number between 1 – 50.
h. Card processor type: Choose either Pentium or Media Card from
the drop-down list. Select Pentium if using the ITG-P 24-port line card
(dual-slot card). Select Media Card if using the Media Card 32-port or
8-port line card (single-slot card).
i. H323 ID: The H323 ID within IP Line 4.5 is for the Virtual Office/
Media Gateway 1000B feature. Keep the H323 ID the same for all the
elements within one node.
j. Enable set TPS: Select the check box.
k. System name: Enter the name of the system.
l. System location: Enter the location where the system resides.
m. System contact: Enter a contact name and telephone number.
3To add additional cards to the node, click the Add button again and enter
the new card information. Repeat this step for each card that is being
added to the node.
New cards appear under the Cards menu as they are added. See
Figure 97.
Figure 97
Cards added to the system
4To edit the properties of an existing Voice Gateway Media Card, click the
plus sign (+) to the left of the card to be edited to display the card’s
properties and make the desired changes.
End of Procedure