IP Line administration using Element Manager Page 601 of 910
IP Line Description, Installation and Maintenance
Figure 196
pbxLinkShow output
Note: The pbxLinkShow command can also be entered at the IPL>
command line. Telnet to each Voice Gateway Media Card and log in.
Enter the pbxLinkShow command at the IPL> prompt. Alternatively, look
at the display on the card’s faceplate and ensure it is not displaying an
alarm.
33 In the Group drop-down list of the General Commands window, select
Misc.
34 In the Command drop-down list, select cardRoleShow and click RUN.
Note: If the card role is not Follower as expected, Telnet to the card’s
IPL> CLI and enter the clearLeader command to remove the clearLeader
flag.