Page 152 of 910 Features
553-3001-365 Standard 4.00 August 2005
On Voice Gateway Media Cards, the log files are located in the /C:/LOG
directory. The Download log files are limited to 10K each for a total of 20K.
Approximately 128 log messages can be saved in each log file.
On the Signaling Server, the log files are located in the /U/LOG directory.
The Download log files are limited to 400K each, for a total of 800K.
Approximately 5000 log messages can be saved in each log file.
The Download log files are generated during initialization of the UFTP
Server task. If the Download log files do not exist during the start-up of the
UFTP Server task, new Download log files are created.
The Download log file is a circular file, writing over the oldest information
when the log file is full. Each log file entry contains the following download
information about the IP Phone:
• F/W download date
• F/W download start time
• F/W download status (specifies if the download succeeded or failed)
• IP Address of the IP Phone
• IP Phone type
• F/W download error code. If the F/W download was successful, this field
is empty. The following is the list of all possible error codes:
— 00 = F/W not exist
— 01 = F/W size is 0
— 02 = F/W corrupted
— 03 = RUDP connection down
— 04 = Response time out
— 05 = Reason: Unknown
The format of the download log message is:
<Date> <Download start time> <Download Status> <IP address of the IP
Phone> < IP Phone type> <Error Code>