Page 840 of 910 Convert IP Trunk Cards to Voice Gateway Media Cards
553-3001-365 Standard 4.00 August 2005
7Repeat the previous step for each card that is to be added to the node.
8When the card property data has been entered for all the cards, click the
Save and Transfer button.
This action saves the configuration changes to the Call Server and
transfers the changes to the Signaling Servers and Voice Gateway Media
Cards in the node. The BOOTP and CONFIG.INI files are saved on the
Call Server and transferred to the Signaling Server Leader. The BOOTP
table is updated so that the converted cards can receive their IP address
configuration.
The Transfer Progress window opens.
Note: It might be necessary to press the Reset button on the faceplate of
the converted cards to trigger a new BOOTP request. Do not continue
with this procedure until all converted cards have received their IP
addresses.
9Click the Transfer to Failed Elements button to transfer the bootp.tab
and CONFIG.INI files to the converted cards.
10 Configure the new Voice Gateway TNs on the Call Server using one of
the following methods:
a. Use LD 14 from the Call Server CLI to configure the new Voice
Gateway TNs.
or
b. In the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Configuration.
The Node Configuration window opens.
Enable set TPS check mark
System name MGC1
System location BWM system 1
System contact John Smith
Table 111
Example of card properties data (Part 2 of 2)