Voice Gateway Media Card maintenance using Element Manager Page 773 of 910
IP Line Description, Installation and Maintenance
3Use the disiTPS command at the IPL> CLI to disable the LTPS on the
faulty Voice Gateway Media Card.
Note: This forces all IP Phones registered on this card to reregister. If
there are sufficient resources, this can take up to several minutes. If there
are not sufficient resources, IP Phones can remain unregistered
indefinitely.
4Use the isetShow command to monitor the status of the card and the
re-registration of the IP Phones.
The Voice Gateway Media Card is completely disabled when there are no
IP Phones registered on the card.
5Remove the faulty Voice Gateway Media Card from the system.
6Install the replacement Voice Gateway Media Card into the card slot in the
system. To do this:
a. Pull the top and bottom locking devices away from the card faceplate.
b. Insert the Voice Gateway Media Card into the card guides and gently
push the card until it makes contact with the backplane connector.
Hook the locking devices.
Note 1: When cards are installed, the red LED on the faceplate remains
lit until the card is configured and enabled in the software, at which point
it turns off. If the LED does not follow the pattern described or operates in
any other manner (such as continually flashing or remaining weakly lit),
replace the card.
Note 2: Observe the faceplate maintenance display to see start-up
self-test results and status messages. A display of the type F:xx indicates
a failure. See Table 79 on page 689 for a listing of the ITG-P 24-port line
card’s display codes and to Table 80 on page 691 for a list of the Media
Card’s display codes.
7In the Element Manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Configuration.
The Node Configuration window opens.
8Click the Edit button associated with the node containing the card to be
replaced. The Edit window appears.
9Expand the Cards section by clicking the plus sign (+) to the left of Cards.
10 Select the desired Voice Gateway Media Card from the list of cards in the
node.