Page 594 of 910 IP Line administration using Element Manager
553-3001-365 Standard 4.00 August 2005
d. Voice LAN (TLAN) IP address: This is the TLAN network interface
IP address for the card.
e. Voice LAN gateway (TLAN) IP address: This is the IP address of
the router interface on the TLAN subnet.
f. Hostname
g. Card TN: Enter the card slot number between 1 – 50.
h. Card processor type: Choose either Pentium or Media Card from
the drop-down list. Select Pentium if using the ITG-P 24-port line card
(dual-slot card), or select Media Card if using the Media Card
single-slot card.
i. H323 ID: The H323 ID in IP Line 4.5 is for the Virtual Office/
MG 1000B feature. Keep the H323 ID the same for all the elements
within one node.
j. Enable set TPS check box: Select this check box.
k. System name: Enter the name of the system.
l. System location: Enter the location where the system resides.
m. System contact: Enter the system contact name and telephone
number.
9To add additional cards to the node, click the Add button again and enter
the new card information. Repeat this step for each card to be added to
the node.
Observe that new cards appear under the Cards section as they are
added. See Figure 191 on page 594.
Figure 191
Added cards