Nortel Networks 1000 Data Path Capture Tool commands

Voice Gateway Media Card maintenance Page 727 of 910
IP Line Description, Installation and Maintenance
Figure 234
vgwShow command sample output
The number of IP Phones that use that public IP address is printed (2 in this
example), but only one of the IP Phones is displayed. To see the other
IP Phone, determine the Public IP address and Public Media Port using the
command isetNATShow. Then enter vgwShow using the Public IP address
and Public Media Port. An example of the output is shown in Figure 235.
Figure 235
vgwShow sample with Public information
Data Path Capture Tool commands
Table 96 lists the commands used with the Data Path Capture Tool.
Table 96
Data Path Capture Tool commands (Part 1 of 2)
IPL> command Description
Signaling
Server
captureStart Begins the capture operation. When the command is
entered, data for the gateway channel <tcid> (0-23 for
ITG-P 24-port card and 0-31 for Media Card) begins
to be captured to the circular queue.
captureStop Stops the audio data capture.