Page 606 of 910 IP Line administration using Element Manager
553-3001-365 Standard 4.00 August 2005
16 In the Node Configuration window, click the Transfer/Status button
associated with the node containing the new Leader card and the deleted
Leader card.
End of Procedure

Change the IP addresses of an IP Telephony node in

Element Manager
Before changing any IP address, understand “Codecs” on page 287, and
consult with the IP network administrator.
IP address configuration changes are completed in four sections of the Node
Configuration > Edit window. The four sections are:
• Node – network connections are configured in this section.
See Figure 199 on page 607.
• Cards – card properties are configured in this section.
See Figure 200 on page 609.
• SNMP – SNMP traps are enabled and configured in this section
See Figure 201 on page 611.
• LAN Configuration – ELAN/TLAN network interface configuration and
card routing table entries are configured in this section.
See Figure 202 on page 612.
To change the IP address of an IP Telephony node, follow the steps in
Procedure 80.
Procedure 80
Changing the IP addresses of an IP Telephony node in Element
Manager
1In the Element manager navigator, click IP Telephony > Nodes:
Servers, Media Cards > Configuration.
The Node Configuration window opens.
2Click the Edit button for the node that is having the IP address changes.
The Edit window opens.