Page 636 of 910 IP Line administration using OTM 2.2
553-3001-365 Standard 4.00 August 2005
Introduction
This chapter explains how to administer IP Line 4.5 and the Voice Gateway
Media Card on the systems using OTM 2.2.
Optivity Telephony Manager (OTM) provides a graphical user interface to
the Voice Gateway Media Card. OTM can be used to Telnet to the card,
install and upgrade software, configure alarm event reporting, view and
update card property and configuration data, add new cards to a node,
schedule reports and other related tasks.

OTM administration procedures

This section describes the OTM administration procedures using the OTM
IP Line 4.5 application. All references to OTM in the following procedures
assume the latest OTM version.

Operational Measurement report scheduling and generation

Operational Measurement (OM) reports provide important statistical and
traffic information and feedback to the system administrator to better
engineer the system. The information stored in the OM file applies only to the
calls routed over the IP network by way of IP Line 4.5. OM reports give a
quantitative view of system performance, such as jitter.
OTM is used to support Operational Measurements on the systems.
The OM reports are a collection of data from all the Voice Gateway Media
Cards in the network. OM data is written to a file every hour. At midnight, the
OM file is copied to a backup file, and the new day starts with a new file.
WARNING
The only support provided for nodes that reside on a
CS 1000 system is the retrieval of OM reports. Refer to
Procedure 87 on page 638 through Procedure 91 on
page 649.