Page 564 of 910 IP Line 4.5 administration
553-3001-365 Standard 4.00 August 2005
electShow
The electShow command shows information to help a technician quickly
become familiar with the current state of the node. The command displays a
list of cards in the node and information about each card. This includes
showing all registered followers to a leader.
The output has two sections:
• cards currently registered
• cards that are in the BOOTP.TAB configuration but not yet registered
Registered cards
The following information is displayed for each card currently registered:
• platform
•TN
• ELAN network interface MAC
• TLAN network interface IP Address
• ELAN network interface IP Address
• how long it has been registered
• how many IP Phones are registered to the card
• number of Time Outs
Unregistered cards
The following information is displayed for each card currently not yet
registered based on BOOTP.TAB:
• platform
•TN
• ELAN network interface MAC
• TLAN network interface IP Address
• ELAN network interface IP Address