Page 376 of 910 Configuration of IP Telephony nodes using Element Manager
553-3001-365 Standard 4.00 August 2005
Configuring SNMP trap destinations
To configure the SNMP trap destinations for the Signaling Server and Voice
Gateway Media Cards in Element Manager, follow the steps in Procedure 27
on page 376.
Procedure 27
Configuring SNMP trap destinations
1In the Edit window, click the plus sign (+) to the left of SNMP.
See Figure 86.
Figure 86
Node > Edit > SNMP
2Select the Enable SNMP traps check box, if configuring one or more
SNMP management IP addresses to receive SNMP traps from cards in
the IP Telephony node.
f. IP address: Enter the IP address of the trap destination. If SNMP
traps are enabled, the SNMP traps are sent to the IP address entered
here. A maximum of eight trap destination IP addresses can be
configured.