IP Line administration using Element Manager Page 611 of 910
IP Line Description, Installation and Maintenance
Figure 201
Node > Edit > SNMP
7Select the Enable SNMP traps check box, if configuring one or more
SNMP management IP addresses to receive SNMP traps from cards in
the IP Telephony node.
f. IP address: Enter the IP address of the trap destination. If SNMP
traps are enabled, the SNMP traps are sent to the IP address entered
here. More than one IP address can be configured.
g. Subnet mask: the subnet mask for the IP address of the trap
destination must always be configured as 255.255.255.255.
WARNING
Do not enter the actual value of the subnet mask on the
interface of the SNMP trap destination. Doing so can
cause misrouting of RTP media and signaling, leading to
no speech path between the IP Phones and the Voice
Gateway Media Cards or failure of the IP Phones to
register with the LTPS