Page 490 of 910 Configuration of IP Telephony nodes using OTM 2.2
553-3001-365 Standard 4.00 August 2005
c. Subnet mask: The subnet mask for the IP address of the trap
destination must always be configured as 255.255.25.255.
d. To add a trap destination IP address, enter the IP address and
subnet mask (if applicable) in the SNMP IP address field, and click
Add.
Add trap destination IP addresses for the following:
local or remote OTM server
PPP IP address configured in the router on the ELAN subnet for
the remote support OTM PC
SNMP manager for remote alarm monitoring
Note: Up to eight SNMP trap destinations can be defined.
3Click Apply.
4Click OK to exit the window.
5To transmit the information to the node, from the menu select
Configuration > Synchronize > Transmit.
End of Procedure

Note: If the community names are forgotten, connect a TTY to the

Voice Gateway Media Card maintenance port. Restart the card. The card

displays the community name on the TTY during start-up.

WARNING
Do not enter the actual value of the subnet mask on the
interface of the SNMP trap destination. Doing so can
cause misrouting of RTP media and signaling, leading to
no speech path between the IP Phones and the Voice
Gateway Media Cards or failure of the IP Phones to
register with the LTPS.