Page 176 of 910 Features
553-3001-365 Standard 4.00 August 2005
The type of NAT is indicated, as detected by Echo Server 2. The support of
RTCP signaling is indicated by Y; if N is displayed, then features that depend
on RTCP, such as Proactive Voice Quality Management (PVQM), will not
work.
An IP Phone’s TN or public signaling IP address can be entered after the
command. Entering the isetNATShow command at the CLI of any card in an
IP Telephony Node along with the TN or IP address of a particular IP Phone
displays the information shown in the previous example, as well as the
identification of the card with which the IP Phone is registered. This is useful
when it is necessary to identify the card on which to enable a message
monitor, or to connect a sniffer, when debugging a specific IP Phone’s
problem.
Figure 38 on page 177 shows a sample output.