Page 816 of 910 Voice Gateway Media Card maintenance using OTM 2.2
553-3001-365 Standard 4.00 August 2005
4Leave the defaulted “Node Properties” option selected, or click the “Card
Properties,” depending upon the situation:
a. Leave the defaulted “Node Properties” in the following situations:
— when the OTM IP Line data is out of date and all OTM IP
Telephony node data will be synchronized with the data from the
Voice Gateway Media Cards on the node
— when adding a node in OTM by retrieving data from an existing
node with more than one card
b. Select “Card Properties” when attempting to isolate a problem with IP
Line configuration on a particular card.
5Select the check boxes for the IP Line configuration data to be retrieved,
depending on the situation:
a. Select Node Properties and Card Properties, if the OTM IP Line
data is out of date and all OTM IP Telephony node data will be
synchronized with the data from the Voice Gateway Media Cards on
the node.
b. Select Card Properties if adding a node on OTM by retrieving data
from an existing node that consists of more than one card.
c. Select any combination of check boxes as indicated by problem
symptoms when attempting to isolate a problem on a particular card.
Use the “dummy” node for this purpose.
6Click the Start retrieve button.
7Monitor the progress of the retrieval under Retrieve control box.
The retrieved Node Properties and Card Properties overwrite the existing
OTM IP Line configuration data for the respective node or card.
End of Procedure