Configuration of IP Telephony nodes using Element Manager Page 395 of 910
IP Line Description, Installation and Maintenance
5Exit from the login session.
End of Procedure
After the UKLossPlanSet command is entered, the loss plan adjustment is
transmitted by that card to all other cards in the node. The loss plan is then
adjusted on any registered IP Phones, and on other IP Phones as they register.
To clear the loss plan adjustment, use the command UKLossPlanClr.
Refer to “IP Phone Loss Plan (UK) commands” on page 740 for more
information on these and other loss plan commands.

Add card and configure the card properties of the

Voice Gateway Media Card
If the network administrator provides IP addresses and subnet masks in CIDR
format, for example, “10.1.1.10/24”, convert the subnet mask to dotted
decimal format. See Appendix E on page 901.
Note: In the Cards section, cards can be added, changed, or removed in
the node one at a time.
Follow the steps in Procedure 34 to add a new Voice Gateway Media Card
and configure its properties, or to configure the properties of an existing
Voice Gateway Media Card.
Procedure 34
Adding card and configuring Voice Gateway Media Card properties
1Click Cards and then click the Add button.
See Figure 96 on page 396.
WARNING
Every node must has a Leader. Exercise caution when
removing the Leader card. If the Leader card is deleted,
a new Leader must be configured immediately.